What are the main coders for electrical machinery

Main shaft encoder is widely used in industrial production and daily life,want to better make main shaft encoder work for us,suggest that operators should pay attention to the following aspects:

The main shaft encoder should be aware of electrical aspects:

Please do not use the output line of the main shaft encoder and the line of power in the same pipe,nor should it be used near the switchboard to prevent interference.Shield cable should be used when wiring.

Before installation,should check carefully,the product specification is consistent with the coder type,the connection is correct,the wrong wiring can cause internal circuit damage.

In long-distance transmission,the signal attenuation factor should be considered,and the output mode of the output impedance is low and the anti-jamming capability is strong.

The transmission distance of the pulse signal is related to the following factors:frequency,output circuit,input circuit,transmission line,transmission frequency.

The main shaft encoder should note in mechanical aspects:

The connections between main shaft encoder output shaft with users,should use elastic soft connection,avoid by all means use rigid connection,in order to avoid the user axis series,beating,causes the damage of shaft encoder and encoder.

The main shaft encoder should be gently pushed into the shaft of the shaft,which is strictly forbidden to hit and hit with a hammer,so as not to damage shafts and yards.When installing,be aware that the allowable shaft load must not exceed its limit load.

Shall ensure that the main shaft encoder shaft and output shaft of the user in different speed<0.2 mm,with axis Angle<2°

Be careful not to exceed its electrical limit speed,as the electrical signal may be lost if it exceeds the limit speed allowed by the encoder.

Nmax=(maximum response frequency/L)x 60 r/min(L for grating pulse number)

In the long term,please check whether the main shaft encoder is connected to the body,and the fixed screw,etc.,to prevent the normal use of the equipment.

The main shaft encoder should be aware of the environment:

Because the main shaft encoder is a precision instrument,it should be used with no vibration.

Do not splash water,oil,etc.When necessary,add a protective shield when necessary.

Please note that the ambient temperature and humidity are within the scope of the instrument's use.

Note:improper installation or misuse affects the performance and service life of the main shaft encoder